aFe - Black Series Cold Air Intake 12-15 Porsche Carrera/Carrera S 3.4L/3.8L

Description

aFe Black Series Cold Air Intake 12-15 Porsche Carrera/Carrera S 3.4L/3.8L

Unique Computer Designed Housing:

A custom CAD plastic housing encloses the dual performance air filters. This roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory mounting location. It also connects to the factory air inlets to capture the coolest air available.

Carbon Fiber Intake Tube:

Lightweight high gloss clear-coated plain weave carbon fiber tube directs the filtered air from the dual air filters to the engine. It is computer designed and tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay.

Carbon Fiber Cover:

This unique carbon fiber cover is also lightweight high gloss clear-coated plain weave carbon fiber and closes off the housing from unwanted hot engine air. It features a Black Series emblem for authenticity and is secured to the housing using aFe POWER laser-etched washers and bolts. This cover will enhance your engine bay appearance.

8% Weight Reduction:

This air intake system offers an 8% reduction versus the factory air intake system, thanks to the extensive use of carbon fiber material.

2 Sets Of Performance Air Filters:

This Black Series intake system offers the option to use a pre-oiled or oil-free 360 degree radial flow performance air filters. Each kit comes with two pairs of large 7″ tall inverted top conical air filters (Total of 4): One set constructed in our 5-layer progressive oiled media (Pro 5R) for maximum airflow and performance, and the other made out of our 3-layer synthetic oil-free media (Pro DRY S) for maximum convenience.

Premium Hardware:

Premium stainless steel clamps, a reinforced silicone coupling and polyurethane sleeve housing inserts are used for strength and durability while also providing the most secure installation available.

Fitment After Porsche Recall:

In 2020, Porsche created a recall to add a heat shield in the engine compartment under the air box. The heat shield is to prevent foreign objects left in the engine compartment to make contact with hot exhaust system components and ignite. aFe POWER housing will currently not fit with the heat shield added after the recall. aFe POWER is working on making an update to the housing to allow fitment with this heat shield.

Emissions Disclaimer:

This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Product Details

• +15 HP / +15 lbs. x ft. Torque max gains (vehicle tested with Pro 5R air filter media)
• Outflows factory intake by 14%
• 8% Weight reduction vs. factory air intake
• Lightweight high gloss, clear-coated plain weave carbon fiber tube and cover
• Custom aFe POWER laser-etched stainless steel washers and bolts
• CAD Roto-Molded housing that enclosed the dual air filter setup
• Black Series plate for authenticity
• Includes both Pro Dry S oil-free & Pro 5R oiled, washable/reusable performance air filters
• No Cutting or Drilling on Factory Parts for Quick and Easy Install
• Air flow chart
• Installation instructions
• Dyno chart

Fitment

aFe’s Warranty

For information on aFe’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.