aFe - BladeRunner Street Series Intercooler w/ Tubes 94-02 Dodge Diesel Trucks L6-5.9L (td)

Description

aFe – BladeRunner Street Series Intercooler w/ Tubes 94-02 Dodge Diesel Trucks L6-5.9L (td)

End Tanks:

The unique BladeRunner end tanks are constructed out of cast 356-T6 aluminum that incorporate three multi-directional vanes.

Multi-Directional Vane Technology:

The BladeRunner MDV technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling than competitors units.

2-1/2″ Bar and Plate Core Design:

The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. This intercooler also features 3-5/8″ inlet/outlet connections compatible with stock intercooler tubes. This intercooler outflows OE style tube and fin core designs by 10%!

TIG-Welded:

100% TIG-Welded by certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks.

Pressure Tested:

The BladeRunner Intercooler is test pressure rated at 100psi.

Flow and Performance:

The intercooler tubes are constructed of 3″ mandrel-bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth mandrel bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.

aFe – Badging:

A unique aluminum laser-cut aFe – power logo plate is welded-on for an aggressive style.

Installation Is A Snap:

Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, spring loaded, T-bolt clamps for a leak-free seal and heavy-duty 5-Ply couplings for strength.

Note: This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.

Product Details

• Outflows the stock intercooler with tubes and increases heat dissipation
• Constructed out of cast 356-T6 aluminum end tanks
• Incorporates Multi-directional vane (MDV) technology to direct hot airflow through the intercooler core
• 2-1/2″ Bar and plate core design that is 25% larger than stock
• This intercooler is 100% TIG-Welded by certified craftsmen for strength and durability
• Intercooler is test pressure rated at 100psi
• 3″ Hot-Side and Cold-Side mandrel-bent aluminum tubes
• Powder-coated wrinkle-black for heat resistance
• Coupling hose allows for expansion, movement, and vibration between two hard pipes
• Includes high-quality reinforced 5-Ply silicone couplings and stainless steel spring-loaded T-bolt clamps for secure installation
• Uses all factory mounting locations and includes all necessary hardware for a hassle-free installation

Fitment

aFe’s Warranty

For information on aFe’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.