HPT Pro Link+ Cable for MPVI2+/MPVI3

Description

HPT Pro Link+ Cable for MPVI2+/MPVI3

PROLINK+ for MPVI2+ and MPVI3

Designed specifically for MPVI2+ and MPVI3, the PROLINK+ cable allows professional users to input 2x analog signals (from a wideband sensor, map sensor, boost pressure sensor etc.) and 1x CAN bus signal simultaneously.

Reminder: If you have an MPVI2+ interface, you must purchase Pro Feature Set to be able to use a PROLINK+ cable..

PROLINK+ Specifications

• 2x dedicated 0-5V analog inputs.
• 1x CAN bus input (500kbps).
• 100Hz sampling rate.
• M8 connector to 5 wire harness.
• For MPVI2+ and MPVI3 interfaces.
• MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.

PROLINK+ for MPVI3 Devices

Since the latest generation MPVI3 interface is standard with Pro Feature Set, you only need to purchase the PROLINK+ cable to wire in these additional inputs. No other purchase is required.

PROLINK+ for MPVI2+ Devices

To utilize the PROLINK+ cable with an MPVI2+ interface, the purchase of Pro Feature Set is required. PROLINK+ will be provided FREE of charge (plus shipping) with the purchase of Pro Feature Set for MPVI2+ interfaces. However, if you would like additional PROLINK+ cables for multiple vehicles, you can purchase them on this page.

Pro Feature Set

Pro Feature Set enables the use of PROLINK+ for both MPVI2+ and the latest generation MPVI3. However, remember that MPVI3 is now standard with Pro Feature Set.

Pro Feature Set also unlocks standalone data logging, allowing you to log directly to your interfaces internal storage without being tethered to a laptop. This highly convenient feature makes it easier than ever to collect data while on the road, track, or dyno.

HP Tuners Warranty

For information on HP Tuners warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.